STS Brazed Solid Drill Heads
| Outer Thread(TYPE STS-EX) | Dia. Dc(mm) |
Rework | Tolerance | Surface roughness Ra |
Feature/Use | ||
|---|---|---|---|---|---|---|---|
| MBU |  |
8.00 - 14.79 |  |
IT9 | 2μm | Higher productivity and better surface finish than gundrill. Good chip breaking with 3 step cutting edge design. |
 |
| UTE |  |
12.60 - 20.00 |  |
IT9 | 2μm | Higher productivity and better surface finish than gundrill. Good chip breaking with 3 step cutting edge design. First recommendation for dia. ø12.60 - 15.59. |
|
| BTU |  |
12.60 - 65.00 | |
IT9 | 2μm | First recommendation for dia. ø15.60 or more. Good chip breaking with 3 cutting edges. (ø12.60 - 15.59mm has 2 cutting edges) Covers all materials with various carbide grade combinations. |
|
| Inner Thread(TYPE STS-IN) | Dia. Dc(mm) |
Rework | Tolerance | Surface roughness Ra |
Feature/Use | ||
|---|---|---|---|---|---|---|---|
| TU |  |
14.51 - 65.00 |  |
IT9 | 2μm | Delivered with standard chip-breaker. | |
Rework symbol chart
| Symbol | Service | Detail |
|---|---|---|
|
Retipping service | Carbide tips and pads replaced, drill ground to size |
|
Regrinding service | Regrinding of tip edge and guide pads |
|
NOT AVAILABLE | Not available |
Indexable Drill Head
| Outer Thread(TYPE STS-EX) | Dia. Dc(mm) |
Tolerance | Surface roughness Ra |
Feature/Use | ||
|---|---|---|---|---|---|---|
| UNIREV |  |
16.01 - 28.50 | IT9 - 10 | 2μm | Indexable drill head for small diameter. Good chip breaking with 3 step cutting edge design. |
|
| UNIDEX |  |
38.00 - 500.00 | IT9 - 10 | 3μm | Worldwide best selling indexable drill head. Multiple options to cover various cutting condition. Drill diameter can be enlarged up to 5mm with plus (+) spare parts depending on outer cartridge size. |
  |
| Inner Thread(TYPE STS-IN) | Dia. Dc(mm) |
Tolerance | Surface roughness Ra |
Feature/Use | ||
|---|---|---|---|---|---|---|
| UNIREV |  |
16.01 - 28.50 | IT9 - 10 | 2μm | Indexable drill head for small diameter. Good chip breaking with 3 step cutting edge design. |
|
| UNIDEX |  |
38.00 - 500.00 | IT9 - 10 | 3μm | Worldwide best selling indexable drill head. Multiple options to cover various cutting condition. Drill diameter can be enlarged up to 5mm with plus (+) spare parts depending on outer cartridge size. |
|
Direct Mount Drill Head
| Outer Thread(TYPE STS-EX) | Dia. Dc(mm) |
Tolerance | Surface roughness Ra |
Feature/Use | ||
|---|---|---|---|---|---|---|
| 0124 drill head |  |
30.00 - 65.00 | IT9 - IT11 | 2μm | No diameter setting necessary. High productivity reduces cost. Tool steel body increases tool life. |
|
| Inner Thread(TYPE STS-IN) | Dia. Dc(mm) |
Tolerance | Surface roughness Ra |
Feature/Use | ||
|---|---|---|---|---|---|---|
| 0124 drill head |  |
30.00 - 65.00 | IT9 - IT11 | 2μm | No diameter setting necessary. High productivity reduces cost. Tool steel body increases tool life. |
|
